10
water detector functions can also be
inverted. The detector then transmits when
the sensor is dry.
Technical data
Weight
(including battery)
90 x 35 x 30 mm (transmitter)
Selecting the installation location
Install the water detector in a location that
will be flooded very quickly in the event of
water penetration. This ensures that an
alarm will be triggered as soon as possible.
Install the wireless detector in a position
with the best available transmission
properties. In the best case, an optimal
position can be tested using a wireless
testing box. Install the detector as high as
possible. This protects the transmitter from
damage in the event of flooding. Ensure
that the transmitter is installed on a level
surface, with the contacts for the water
sensor facing downwards.
To Next Page
Loading...
Need help?
General
