6
5
8
Sicherheitscode
ändern
Change
Security Code
Bei der Erstinstallation muss der
Sicherheitscode geändert werden.
Die erneute Verwendung des Standard
Sicherheitscodes „123456“ ist nicht
möglich. Es wird empfohlen
eine Kombination aus Zahlen
sowie Klein- und Großbuchstaben
zu verwenden. Die Verwendung
von Umlauten und Sonderzeichen
ist nicht möglich.
In the rst installation you will
need to change the security code.
You will not be allowed to enter the
standard security code ‚123456‘ as
your new code. We recommend using
a combination of numbers and letters
in lower and uppercase. The use of
special characters is not supported.
Conrm
Sicherheitscode ändern
•••••••
•••••••
i
Werksein-
stellungen
Default
Settings
7
W-LAN
Einrichtung
Wi-Fi Setup
Wählen Sie ihr WLAN-Netzwerk aus
der Drop-Down Liste aus. Geben Sie
Ihren WLAN Schlüssel ein und
bestätigen Sie mit OK. Die Kamera
benötigt für den Verbindungsauau
ca. 90 Sekunden.
Choose your Wi-Fi Network in the
drop down list. Type in your Wi-Fi
password and conrm with OK.
The camera needs around 90
seconds to establish the connection.
XXXXXX
Home
Halten Sie die Reset-Taste für
ca. 5 Sekunden gedrückt, bis
die grüne LED schnell zum
Blinken beginnt. Die Kamera
wird zurückgesetzt und startet
neu. Die Kamera ist nach ca.
90 Sekunden wieder im
Auslieferungszustand
Hold down the reset button
for about 5 seconds until the
green LED flashes fast. This
will reset the camera and it
will restart. The camera will
be restored to its default
settings in approximately 90
seconds.