– 36 –
> 1 m
RM
> 20°
0,5 - 1 m
RM
Special case: sloped ceilings
Special case: partially sloped ceilings
> 20°
ceilings sloped at an angle of < 20°.
angle of > 20°, detectors should be
installed 0.5–1 m away from the
highest point.
apply for partially sloped ceilings with a
horizontal ceiling surface measuring
< 1 m in width.
with a horizontal ceiling surface
measuring > 1 m, detectors should be
installed in the centre of the horizontal
surface.
RWM
RWM
Choosing a location
The smoke alarm should not be installed in the following areas
To Next Page
Loading...
