Need help?Do you have a question about the AC Infinity AIRPLATE Series and is the answer not in the manual?
General| Color | Black |
|---|---|
| Fan Count | 1 |
| Fan Speed Control | Yes |
| Power Connector | USB |
| Airflow Direction | Reversible |
| Mounting | Screws |
| Voltage | 5V |
| Controller Compatibility | Yes, with AC Infinity controllers |
| Model | AIRPLATE S Series |
Explains the necessity of intake and exhaust for balancing static pressures within the cabinet.
Details ideal fan placement for natural convection, exhausting warm air and intake of cool air.
LCD display for temp monitoring, thermal control, speed control, alarms, and SMART energy mode.
Two USB ports and four outlet sockets to power additional devices via the front switch.
Determine mounting location, secure stencil, and mark drilling points and outline.
Drill mounting holes and cut the rectangular outline for the opening using a saw.
Push cabinet fan into the cut opening for a flush mount, ensuring no perimeter contact.
Screw bolts into mounting holes to securely fasten the cabinet fan.
Powering the fan by plugging the USB connector into a port or power adapter.
Connecting fan's USB to controller and power adapter to controller's power port.
Plug the AC power cord into the 3-pin port on the backside of the cabinet fan.
Connect the AC power cord to a wall outlet to power the cabinet fan.
Sets fan speed to OFF, LOW, MEDIUM, or HIGH, affecting daisy-chained fans.
Explains the function of MODE, UP/DOWN, and LEAF buttons for unit control.
Details SETTING TEMP, ALARM TEMP, PROBE TEMP, FAN SPEED, BRIGHTNESS, and ALERT ICONS.
Fan runs at set speed level regardless of probe reading; also sets AUTO/SMART max speed.
High temperature trigger activates fans when PROBE meets or exceeds SETTING temperature.
Control cooling fans in four zones with independent programming via zone change button.
To Next Page
