EasyManua.ls Logo

Acapella Violon 2001 - Unpacking; Ion TW 1 Information

Acapella Violon 2001
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unpacking
For transportation the VIOLON 2001 has been wrapped in stretch foil
which provides an excellent protection. Remove this foil by cutting it
carefully with a blade or a pair of scissors on the rear side of the loud-
speakers at the height of the ion tweeter. Undo the foil right to the bottom.
Then you can strip off the whole foil. Please also remove the foil from the
mid-range horn units. Then insert them into the corresponding mounting
space of the loudspeaker’s cabinet. Fix the horn units with both of the
screws. Tighten the rear screw first and then the front screw (fixes the
cover). You will find the appropriate inbus key in the accessory carton.
Now, the loudspeakers are completely assembled.
Information’s about the Ion TW 1
The ACAPELLA ion tweeter „ION TW 1 S“ is a perfected and
sophisticated loudspeaker chassis, whose exceptional performance and
qualities can only be enjoyed completely if used properly.
It was designed to reproduce the harmonics of the music as detailed as
possible. To reach this goal, a design with the smallest possible mass
had to be developed. Relative to its function, the ACAPELLA ion
tweeter has no mass! To carry out this project, a very unusual kind of
design had to be created.
High voltage within the unit produces a constant arc (which can never
be completely silent). This arc is modulated with the musical signal
(flame oscillates with the time of the music). This is the reason why
the number of electrons within the arc varies. A larger or smaller amount
of electrons requires similar space. Due to this variable need of space,
the surrounding air molecules have to dodge the more or less quickly.
This evasive action or bumping of the air molecules generates over-, resp.
underpressure and, therefore, sound. In this way, the ACAPELLA ion
tweeter is able to reproduce sound without using a membrane and, finally,
without its mass inertia.
Regarding transient capabilities and phase stiffness, the obtained sound
quality cannot be realised by using conventional tweeters. Comparing
the Ion tweeter with other tweeter systems, is unobtrusive sound image
will attract you, assuming that correct adjustment of the play back level has
been done. This kind of reproduction is attributed to the lack of harmonic
and transient distortions.