EasyManua.ls Logo

Accessory Power MINI CHARGER - Charging Batteries; Specifications; Charging USB Devices; Safety Warnings

Accessory Power MINI CHARGER
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating instructions for
charging batteries
.
Insert AC plug of the charger into
wall outlet
.
Indicator light will turn green
.
Insert battery matching the + and
– of battery with charger
.
Indicator light will turn red when
battery is properly placed inside
and is charging
.
When battery is fully charged
indicator light will turn green
.
Charge time is 2-4 hours
depending on battery capacity
and level of charge
Specications
. INPUT VOLTAGE: AC 100V240V DC 12.5V14V
. INPUT CURRENTAC 100mA DC 500mAMax
. OUTPUT VOLTAGEDC 8.4V/4.2V/4.5V
CHARGING OUTPUT CURRENT600mA
. USB OUTPUT VOLTAGEDC 5V
OUTPUT CURRENT400mA
. SIZEL*W*H80mm×55mm×25mm WEIGHT100g
Operating instructions for
charging USB devices
.
Insert AC plug of the charger into
wall outlet
.
Indicator light will turn green
.
Plug in USB cable to Mini-Charger
USB port on bottom
.
Plug other end of cable into your
mobile phone or other USB device
.
Indicator light turns red when
cable is connected and charging
.
Check your device battery meter
to determine when battery is full
.
Charge time is about 2-4 hours
depending on battery capacity
and charge state
Warnings
. Avoid damage or possible injury by operating
charger as indicated
. Don’t expose to moisture or high humidity
. Please don’t disassemble or open the charger
. Notice: Avoid dropping charger
. Keep away from children
FREE PRODUCT REGISTRATION Protect your investment by registering now.
www.AccessoryPower.com/warranty