AccessPRO APEB100A User Manual

PUSH BUTTON
DC
12V~24V
RED
SL-100
READER
ORANGE
 Please switch on the appliance again to validate any adjustment of DIP switch value
0 SEC.
2.5 SEC.
5 SEC.
9 SEC.
Setting door lock delay timer :
BROWN
Page 1
APEB100A ( 5 PIN ) APEB100B ( 6 PIN )
Brown - GND Brown - GND
Red +DC12V Red +DC12V
Orange Push Button Orange Push Button
Yellow Door Position Sensor(N.C.) Yellow Door Position Sensor(N.C.)
Green Door Position Sensor(COM.) Green Door Position Sensor(COM.)
Bule Door Position Sensor(N.O.)
Power Supply 1A@DC12V
Current Operation Current 900mA, Holding Current 360mA
Operation Delay Time 0sec. 2.5sec. 5sec. 9sec.
Signal Output Door Sensor(250mA)
Face Plate 200 (L) X 32 (W) X 40 (H) mm
Strike Plate 90 (L) X 26 (W) X 2.5 (H) mm
Bolt 16mm (Throw) X 15.5mm (Diameter)
Safety Measures
(1)Fail-safe Type(Power to lock).
(2)Built-in photo couplers door open push button input contact.
Door will lock again automatically when door is not open
within 5 seconds.
 Connections
Model
Color
Model
Color
 Wiring Diagram
 Specifications
APEB100A Fail - safe Type Deadbolt Lock
Installation Manual
VER 15.02.03

AccessPRO APEB100A Specifications

General

Type	Electric Bolt Lock
Bolt Throw	15mm
Timer	0, 3, 6, 9 seconds
Operating Temperature	-10°C ~ +55°C
Lock Type	Fail-Safe
Operating Voltage	12V DC/24V DC
Dimensions	205mm x 35mm x 41mm
Power Supply	12/24V DC
Compatibility	Access Control Systems
Lock Status Output	NO/NC/COM
Door Status Output	NO/NC/COM