If you subsequently eject the test strip and so turn the meter off, the
result is saved together with the bottle symbol.
Note
The asterisk is used to flag special test results (see Chapter 5.6
“Flagging special results”).
Immediately after the result has been displayed and flagged as a
performance check result:
P Compare the result with the concentration table printed on the label
attached to the test strip container.
The concentration table has two rows and two columns. Rows 1 and 2
contain concentration data for two different control solutions, G1 and
G2; the columns are for the two different units of measurement, mg/dL
and mmol/L.
To Next Page
Loading...
