163
Symbols, error messages and troubleshooting
13
Symbol What it means
12
After testing: the result is outside the tar-
get range.
In a set-up: you are entering target range
settings.
In memory: the result is outside the tar-
get range set at the time of testing.
13
This result is a performance check result.
14
While the result is displayed: the tempe-
rature is outside the permitted range of
+10 °C to +40 °C.
Do not use the result as a basis for thera-
peutic decisions. Allow the meter to
warm up or cool down slowly. Repeat the
test with a new test strip.
To Next Page
Loading...
