EasyManua.ls Logo

ACE INSTRUMENTS AL5500 plus - Technical Specifications; Technical Data; Battery Disposal Guidelines

ACE INSTRUMENTS AL5500 plus
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The shown garbage bins mean that batteries must not be
thrown into the household waste.
The signs below the garbage bins are acronyms for the
chemical substances inside the battery:
Hg: Battery
contains Mercury
Cd: Battery
contains Cadmium
Pb: Battery
contains Lead
Technical data*:
Sensor
Accuracy
Detection Range
Warm-up Time
Dimension
Weight
Power Supply
Working Temperature
Storage Temperature
Calibration
Semiconductor sensor
+/- 0.10‰ (per mill) with reference
to 0.50‰ (per mill = default setting
in the EU)
OR +/- 10% with reference to 0.05%
BAC (default setting in the USA)
OR +/- 0.05mg/L with reference to
0.25mg/L (default setting in UK)
0.000 - 4.000‰ (per mill)
OR 0.000 - 0.400% BAC (USA)
OR 0.000 - 2.000mg/L (UK)
Within 30 seconds at 0.5‰ (EU
setting), it may vary depending
on the value of per mill which
was measured in a test shortly
done before
110 x 46 x 20 mm (H x W x D)
89g (batteries included)
2 pieces of 1.5V AA size Alkaline
battery
0°C - 40°C
0°C - 50°C
After approx. every 6 months
(Recommendation)
For a calibration service you can
send the device to ACE Instruments
(see www.ace-instruments.net).
*The technical data are subject to change without
prior notice for functional improvements.

Other manuals for ACE INSTRUMENTS AL5500 plus

Related product manuals