To Next PageTo Next Page
Need help?Do you have a question about the Ace HRW 019-072 and is the answer not in the manual?
Follow safety rules when working on the appliance. Installation by qualified personnel.
Cutoff power supply before working on the appliance. Manufacturer declines responsibility if instructions are not followed.
General advice for avoiding damage, checking voltage, unit size, and location.
Lists the items included in the package: appliance, control module, suspension kit, manual.
Instructions on how to handle the appliance using pallet trucks or forklifts.
Table showing the net weight of different models.
Details on environment, air, and water temperature limits for operation.
Specifies acceptable voltage variance and phase imbalance for the unit.
Guidance on selecting a suitable location for the unit, ensuring access for servicing and connections.
Dimensions for the air blowing frame with tables for different models.
Dimensions for the return air intake frame with tables for different models.
Steps to change the air blowing direction (front to side or vice versa).
How to access and remove the filter from the side of the unit.
Details on external static pressure available for different models and speeds.
Advice on connecting to water supply/return, pipe materials, hose usage, and isolation valves.
Explanation of symbols and codes used in wiring diagrams.
Details on power supply requirements, protection, and optional switches.
Ensuring correct power supply, network frequency, and wiring compliance.
Information on phase sequence controller and LED indicators for 400V units.
Details on heating elements and related components.
Fixed settings for low and high-pressure pressostats.
List of wire color codes used in the system.
Instructions for installing the RCL remote control module and its support bracket.
Connection diagrams for the µBMS control module with/without MIU board.
Configuration options for jumpers related to temperature measurement and fan operation.
Table detailing factory configurations for different operating modes.
Diagrams showing plug models and jumper configurations for different appliance types.
How to use the appliance's return air sensor (RT) instead of the RCL sensor.
Behavior of the appliance and control module during and after power interruptions.
Connecting a switch to the CLOCK input for remote ON/OFF control.
Maximum distance and connection limits for the RCL remote control module.
Capabilities and connection limits for the µBMS supervision module.
Function and operation of the motorised water valve and its role in energy consumption and pressure.
Final installation checks, plugging, fixing cables, and user explanation of functions.
Pre-start checks and recommendations before commissioning the unit.
Procedure for starting the unit in cooling mode, setting temperature, and checking water loop parameters.
Troubleshooting steps when the fan and compressor are not operating.
Troubleshooting steps when only the fan operates but the compressor does not.
Troubleshooting steps for reduced cooling or heating output.
Troubleshooting steps for insufficient water flow at the plate exchanger.
Troubleshooting steps for water droplets inside the unit.
Troubleshooting steps for unusual noises and vibrations in the casing.
Overview of fault types, causes, and actions for cooling mode.
Troubleshooting for high and low pressure faults in cooling mode.
Troubleshooting for fan thermal overload and anti-freeze protection faults.
Troubleshooting steps for reduced cooling or heating output.
Troubleshooting steps for insufficient water flow at the plate exchanger.
Troubleshooting steps for water droplets inside the unit.
Troubleshooting steps for unusual noises and vibrations in the casing.
Explanation of how fault codes are indicated by LED flashes on the control module.
Process for returning materials under warranty, requiring a return voucher.
Information needed when ordering service or spare parts, including model and serial numbers.
General