2. OSD Menu (continued)
Key Function Description
A Volume up
B Volume down
D Close the Volume OSD
2.5 Volume management OSD:
2.6 Acer logo:
2.7 OSD Message:
When the monitor is turned on, the LOGO will be showed
in the center.
Acer logo
OSD layout for the acer eColor management
OSD layout for volume management
a. Display volume management OSD, when user press “<”
or “>” button on the front bezel.
b. Layout as following figure, key operation at items page.
(No item selected)
2.4 Acer eColor management:
b. Layout as following figure.
a. Display Acer eColor management OSD when user
press “e” button at Function menu or trigger this
function in OSD menu/picture page.
Item Description
Auto Config Please Wait
When user press hot key "Auto" will show this message,
and the monitor do the Auto config function.
Input Not Support
When the Hsync Frequency,
Vsync Frequency or Resolution is out of the monitor support range,
will show this message. The message will be flying.
Cable Not Connected
When the video cable is not connected, will show this message.
This message will be flying.
No Signal
When the video cable is connected, but there is
no active s ignal input, will show this message,then enter power saving.
Please Wait
After user trigger the reset function,
system will show this message notice user the reset is in proceeding.
11
Go to contents page
ACER A211H/A221HQ
To Next Page
Loading...
