Acer A221HQV - Troubleshooting Guide (DVI Mode); Resolving No Picture in DVI Mode

4. Assembly and Disassembly Procedures (continued)
Turn over the LCD monitor to let the screen faced
down and then remove the rear cover.
S8
Move the bracket chassis module down, push the
earing-lock, then remove the FFC cable from the
LVDS connector.
S11
Lift up the bracket chassis module for taking
away the panel module, then put the bracket
chassis module on a protective cushion .
S13
S12
Lift up the bracket chassis module for removing the
front bezel and then put the bracket chassis module
on a working table with protective cushion for later
disassembly.
Tear off the PVC tape,
disconnect the function key cable from
connector of the function key board
release the function key
board from the hook of the front bezel, then
the
. Put the
function key board aside.
S9
function key board
S10
Unplug lamp cables follow the direction as the
below picture.
19
Go to contents page
ACER A211H/A221HQ