Acer A221HQV - Checking the Resolution Change IC Movement

5.1.8 Checking the resolution change IC movement:
5. Troubleshooting (continued)
Check +3.3V supply on I304 pin2.
OK NG
Proceed " Checking the DC/DC converter circuit"
section.
Check +1.2V supply on I305 pin 2.
OK NG
Proceed " Checking the DC/DC converter circuit"
section.
Check X301 27MHz clock input to I308 pin
127 and 128 at TTL level.
OK NG
Failure Point
1) Printed wire broke between X301 and I308 pin
127, 128.
2) C351, C352 is short or open.
3) X301 failure.
Check I308 pin 125 RSTB signal is high
level at normal operation.
OK
Check I308 pin 115,116,117 SPI signal.
OK NG
Failure Point
1) Printed wire broke between I308 pin 115, 116,
117 and I309 pin 2, 5,6.
2) I309 is failure.
Failure Point
I308 failure.
Failure Point
1) Printer wire broke between I308 pin 125 and
2) C391 is short.
3) I308 is failure.
NG
31
Go to contents page
ACER A211H/A221HQ