Acer AL1932 - Page 23

1. Connecting main board and inverter
board with cable
2. Fix the main board and inverter board
on the shielding cover
1. Get the panel and put it on the table
carefully.
1. Fix left and right bracket (BKT) on the
panel.
1. Get bezel and put it on the table
2. Assemble panel into bezel
1. Lock screw * 3 pcs to fasten bezel and
left side bracket (BKT)
.
2. Lock screw * 3 pcs to fasten bezel and
right side bracket (BKT).
1. Put hook * 2 pcs on the bezel.
2. Lock screw * 2 pcs to fix hook and
bezel.
- 23 -