- 24 -
1. Get shielding metal of PCB and insert
LCD cable into the panel connector.
2. Stick tape on the LCD cable and panel
connector as picture.
1. Assemble PCB shielding on the BKT.
2. Lock screw * 4 pcs to fix PCB shielding
and BKT.
1. Insert up side of CCFT cable into
Inverter Board.
2. Insert down side of CCFT cable into
Inverter Board.
Note: The cable line must be arranging as in
ordering from red white blue black).
1. Stick mylar on the panel.
2. Fix I/O port of VGA connector.
To Next Page
Loading...
