61
Serial Port
Primary IDE
Master
Specifies the IDE device connected to the master port of
the primary IDE channel.
Primary IDE
Slave
Specifies the IDE device connected to the slave port of the
primary IDE channel.
SATA Port 0/1/
2/3/
Display the drive name and capacity of the hard drives
connected to the SATA ports.
Parameter Description Option
COM1 Enable Select whether to enable the serial port. Enabled
Disabled
Address Set the base I/O address of the serial port. 3F8
2F8
IRQ Set the IRQ line of the serial port. 4
3
Parameter Description Option
To Next Page
Loading...
