Acer AM100 - Page 4

- 4 -
A tour of the device
Item
Description
1
Function button &
Light sensor
Function button :
 Short press - Detect air quality immediately
 Long press (5 secs), after the beep, immediately let go of the button - Reset Wi-Fi
for reconfiguration. The saved Wi-Fi AP and password setting will be cleared
Light sensor :
The button is also the light sensor for detecting your environmental brightness. While
the Sleep mode is enabled (setup in App), The air quality ambient light will switch
on/off automatically according to the environmental brightness.
2
Wall-mounting hole
Used for hanging the device on a hook
3
Battery LED indicator
Shows the battery status:
 Green - Battery is fully-charged
 Red - Battery is charging
 Off - power adapter not connected
4
Power switch
Turns the power on and off
5
Micro-USB
connector
Connects to the power adapter
6
Wi-Fi indicator
Shows the wireless connection status:
 Green - Local Wi-Fi network and Acer Cloud connected
 Red - Wi-Fi is configured. However, device is disconnected from the Wi-Fi
network, and/or has a limited connection to the local Wi-Fi network (device
cannot access internet or cannot connect to the Acer Cloud)
 Off - Wi-Fi is not configured.
7
Breathing LED light
Lights up using different colors to show the current air quality.
8
Front panel
Detach to reveal the particulate matter sensor for maintenance