Acer AR320 F2 - Initializing a RAID Volume; Assigning a Hot Spare Drive

73
Initializing a RAID Volume
1. After you create the array by pressing <C>, it initializes the RAID Volume
automatically.
Assigning a Hot Spare Drive
1. Select SAS3041E and press <Enter>.
2. Select RAID Properties and press <Enter>.
3. Select View Existing Array and press <Enter>.
4. Select Manage Array and press <Enter>.
5. Select Manage Hot Spares and press <Enter>.
6. Move selection to Hot Spr and press <+> .
7. Press <C> to commit changes.
8. Select Save changes then exit this menu and press <Enter>.
9.
Press <ESC> 4 times and select Exit the configuration Utility and Reboot. Press
<Enter>.