23
Turning off the system
There are two ways to turn off the server — via software or via
hardware. The software procedure below applies to a system running
the Windows operating system. For further operating system
shutdown procedures, refer to the related user documentation.
To turn off the system via software:
1 Press <Ctrl> + <Alt> + <Delete> on the attached keyboard or click
Start on the Windows taskbar.
2 Select Shut Down.
3 Select Shut down from the drop-down window then click on OK.
To turn off the system via hardware:
If you cannot shut down the server using the software, press and hold
the power button for at least four seconds. Quickly pressing the button
may put the server in a Suspend mode only.
To Next Page
Loading...
