3 System upgrades
46
4 Using a screwdriver, loosen the heatsink screws from the
mainboard.
5 Lift the heat sink away from the processor.
6 Lay down the heat sink in an upright position — with the thermal
patch facing upward. Do not let the thermal patch touch the work
surface.
Installing a heatsink
Caution: The heat sink has a thermal interface material (TIM) on
the underside. Use caution so that you do not damage the TIM. If
a protective film is installed on the TIM, remove it.
1 Remove power from the system and unplug the AC power cord
from the power supply.
To Next Page
Loading...
