English
Installing the RAID software applications
Important: Plug your system into an AC adapter before
continuing!
1 After booting normally into Windows, insert the RAID application
CD into your system's optical disk drive.
2 The setup wizard will automatically run.
3 From the left-hand side of the setup screen, select Instant On
Arcade (RAID) and follow the onscreen instructions to install the
RAID-enabled version of Instant On Arcade.
4 If prompted to overwrite an existing version of Instant On Arcade,
select "Yes".
5 Follow the onscreen instructions to complete installation of Instant
On Arcade (RAID).
6 After successful installation, select Intel RAID utility from the left-
hand side of the setup screen.
7 Follow the onscreen instructions to install the Intel Matrix Storage
Console utility.
8 After installation, you will need to restart your system.
Congratulations! Your system is now ready for RAID.
To Previous Page
Loading...
