Recovery - 33
Caution: If you are using a USB flash drive, ensure it is at least
12 GB and does not contain any previous data.
1. Click on Start > All Programs > Acer, then click on Acer
eRecovery Management.
2. To create recovery backup for the hard drive’s entire original contents,
including Windows and all factory-loaded software and drivers, click
Create Factory Default Disc, or if your computer has no optical drive,
Create Factory Default Backup.
- OR -
To create recovery discs for only the factory-loaded software and drivers,
click Create Drivers and Applications Backup.
Important: We recommend that you create each type of recovery
disc as soon as possible.
To Next Page
Loading...
