29
Memory Installation / Removal
The motherboard supports DDR3 memory modules, whereby BIOS will automatically detect memory
capacity and specifications. Memory modules are designed so that they can be inserted only in one
direction. The memory capacity used can differ with each slot.
Installation step:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
NOTE! DIMM must be populated in order starting from DIMMA1/B1 socket. For dual-channel
operation, DIMMs must be installed in matched pairs.
3. Reverse the installation steps when you wish to remove the DIMM module.
Memory Suggest Population Table:
To Next Page
Loading...
