Acer AT110 F2 - SATA Controller Configuration

44
SATA Controller Configuration
Parameter Description Option
SATA Controller When enabled, the SATA controller will
function normally.
Enabled
Disabled
SATA Mode Select the on chip SATA type.
IDE: When set to IDE, the SATA controller
disables its RAID and AHCI functions and
runs in the IDE emulation mode. This is not
allowed to access RAID setup utility.
RAID: When set to RAID, the SATA controlle
r
enables both its RAID and AHCI functions.
You will be allows access the RAID setup
utility at boot time.
A
CHI: When set to AHCI, the SATA controller
enables its AHCI functionality. Then the RAID
function is disabled and cannot be access
the RAID setup utility at boot time.
IDE
RAID
A
CHI
SATA Port 0/1/2/3/4/5 Displays the installed HDD devices.