47
USB Configuration
Parameter Description Option
Detected USB Devices Displays the information of installed
USB devices in the system.
USB Controller When enabled, the USB controller
will function normally.
Enabled
Disabled
Legacy USB Support Enables or disables support for
legacy USB devices.
Enabled
Disabled
Port 60/64 Emulation Enable I/O port 60h/64h emulation
support. This should be enabled for
the complete USB Keyboard Legacy
support for non-USB aware OS.
Enabled
Disabled
Mass Storage Reset Timeout Define USB Mass Storage Device
Start Unit command timeout.
10 sec
20sec
30 sec
40sec
To Next Page
Loading...
