Acer AT110 F2 - Boot Option Menu

59
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specified is not bootable.
By default, the server searches for boot devices in the following order:
1.
Hard drive
2.
UEFI device
3. Optical disc drive
4.
Removable device
5. Network device
Parameter Description Option
UEFI Boot Device
Priority
Press Enter to configure the boot priority.
Hard Disk Drive Priority Press Enter to configure the boot priority.
Optical Disk Drive
Priority
Press Enter to configure the boot priority.
Removable Disk Drive
Priority
Press Enter to configure the boot priority.
Network Device Priority Press Enter to configure the boot priority.
Quiet Boot Enable/Disable Quiet Boot function. Enabled
Disabled
Bootup NumLock Enable or Disable Bootup NumLock function. On
Off
POST Error Pause Select whether to pause POST when a boot-up
error is detected.
Disabled
All, But Keyboard
All Errors
Option ROM Messages Set display mode for Option ROM. Force BIOS
Keep Current
BIOS Watch Timer Enable/Disable BIOS Watch Timing function. Enabled
Disabled