Acer AT310 F2 - SATA;SAS Configuration Details (Continued)

46
Parameter Description Option
SATA Controller When enabled, the SATA controller will
function normally.
Enabled
Disabled
SATA Mode When set to IDE, the SATA controller
disables its RAID and AHCI functions and
runs in the IDE emulation mode. You won't
have access to the RAID setup utility.
When set to AHCI, the SATA controller
enables its AHCI functionality. However, its
RAID functions will be disabled and you won't
be able to access the RAID setup utility at
boot time. You can find more information on
A
HCI in the SATA AHCI Mode BIOS feature.
When set to RAID, the SATA controller
enables both its RAID and AHCI functions.
You will be allowed to access the RAID setup
utility at boot time.
IDE
RAID
A
CHI
RAID Mode This item will prompt when the SATA mode is
set to RAID.
Select the desired RAID mode.
Intel RAID
LSI RAID
SATA Port 0/1/2/3/4/5 Press enter to configure the advanced HDD
settings
Device Name Displays the name of SATA drive.
Device Type Displays the type of SATA drive.
Size Displays the total size of SATA drive.
Serial Number Displays the serial number of SATA drive.