Acer AT310 F2 - Boot Options Menu; Boot Device Priority and Options

60
Boot Options Menu
The Boot Options menu allows you to set the drive priority during system boot-up. BIOS setup will display
an error message if the drive(s) specified is not bootable.
By default, the server searches for boot devices in the following order:
1.
Hard drive
2. Optical disk drive
3. Removable device
4. Network device
5. UEFI device
Paramete
r
Description Option
UEFI Boot Device
Priority
Press Enter to configure the boot priority.
Hard Disk Drive Priority Press Enter to configure the boot priority.
Optical Disk Drive
Priority
Press Enter to configure the boot priority.
Removable Disk Drive
Priority
Press Enter to configure the boot priority.
Network Device Priority Press Enter to configure the boot priority.
Quiet Boot Enable or disable the quick boot function to
speed up the system boot-up process to
shorten the wait-ing time for entering the
operating system and to deliver greater
efficiency for daily use.
Enabled
Disabled
Bootup NumLock State Enable or Disable Bootup NumLock function. On
Off
POST Error Pause Select whether to pause POST when a boot-up
error is detected.
Disabled
All, But Keyboard
All Errors
Option ROM Messages Set display mode for Option ROM. Force BIOS
Keep Current
BIOS Watch Dog Timer Enable or disable Watch Dog Timing function. Enabled
Disabled