Note 9
Note 1:
Ambient temperature = 25°C.
Note 2:
To be measured in dark room after backlight warm up 30 minutes.
Note 3:
To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A.
Note 4:
Definition of response time: The output signals of BM-7 are measured when the input
signals are changed from “Black” to “White” (falling time) and from “White” to “Black” (rising
time), respectively. The response time interval is between the 10% and 90% of amplitudes.
Refer to figure as below :
To Next Page
Loading...
