Acer Chromebook Spin 11 R751T - Touchpad Module Removal

1-10 Disassembly Procedures
Touchpad Module Removal 0
Prerequisite:
Battery Pack Removal
1. Find the touchpad module (E) on the top assembly. Refer to Figure 1-8.
2. Remove the adhesive tape (F) from the touchpad connector (Figure 1-11).
Figure 1-11. Touchpad Tape Removal
3. Disconnect the touchpad FPC (B) from the touchpad connector (A) and the
mainboard connector (C) then remove the touchpad FPC from the top assembly
(Figure 1-12).
4. Remove four (4) screws (D) securing the touchpad module in place (Figure 1-12).
Figure 1-12. Touchpad FPC Removal
E
F
C
B
A
D
All manuals and user guides at all-guides.com