English
6
First things rst
Usage Notes
Do:
y Turn o the product before cleaning.
y Use a soft cloth moistened with mild detergent to clean the displayhousing.
y Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Don’t:
y Block the slots and openings on the unit provided for ventilation.
y Use abrasive cleaners, waxes or solvents to clean the unit.
y Use under the following conditions:
y In extremely hot, cold or humid environments.
y In areas susceptible to excessive dust and dirt.
y Near any appliance that generates a strong magnetic eld.
y Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your
unit.
Warning!
y Do not look into the projector’s lens when the light is on. The bright may hurt your eyes.
y To reduce the risk of re or electric shock, do not expose this product to rain or moisture.
y Please do not open or disassemble the product as this may cause electric shock.
y When switching the projector o, please ensure the projector completes its cooling cycle before disconnecting
power.
y Turn on the projector rst and then the signal sources.
y Do not use lens cap when projector is in operation.
To Next Page
Loading...