Disassembly Procedures 1-21
4. Remove the screw securing the USB board to the upper case.
Figure 1-23. Removing the Screw
5. Slide the USB board to release the I/O connectors from their slots, and then remove the USB
board from the upper case.
Figure 1-24. Removing the USB Board
Table 1-7. USB Board Screw
Screw Name Screw Type Torque Quantity
M 2.0 x 4.0 1.8~2.2kgf.cm 1
WEEE Annex VII Component:
USB Board
To Next Page
Loading...
