Acer Nitro 5 - Creating a Factory Default Backup

1-28 Disassembly Procedures
4. Remove the mainboard from the upper case.
Figure 1-35. Removing the Mainboard (GN20-P0/GN20-P1 model)
Figure 1-36. Removing the Mainboard (GN20-E3/GN20-E5/GN20-E6 model)
Table 1-9. Mainboard Screws
Screw Name Screw Type Torque Quantity
M 2.5 x 5.0 2.65~3.45kgf.cm 2
M 2.0 x 2.5 1.8~2.2kgf.cm 1
WEEE Annex VII Component:
Mainboard
WEEE Annex VII Component:
Mainboard