Acer Nitro 5 - Backing Up Wireless and LAN Drivers; Reset this PC and Keep My Files

1-30 Disassembly Procedures
3. Slightly lift the keyboard FPC and mylar to access the screws. Then remove the two (2) screws
securing the touchpad to the upper case.
Figure 1-39. Removing the Screws
4. Slide the touchpad slightly to disengage it from the bottom tabs. Then remove the touchpad
from the upper case.
Figure 1-40. Removing the Touchpad
Table 1-10. Touchpad Screws
Screw Name Screw Type Torque Quantity
M 2.5 x 2.5 2.65~3.0kgf.cm 2
WEEE Annex VII Component:
Touchpad Module