Acer Predator CG437K

CG437K User Guide English 22
format.
----------------------------------------------------------------------------------------------------------
Note:
• The default is "DP1.4", can support high-bandwidth video.
• (DP1.1/DP1.2) supports most video formats, so DP there is no video output can
change (DP1.1/DP1.2) checked.
• DP input and set 4K-144Hz Mode is On, the DP Format auto change to DP1.4 and
gray out unavailable.
• DP input and set HDR = (Auto or HDR-1000), If contents is HDR format the DP
Format auto change DP1.4 and gray out unavailable.
10. Wide Mode: You can select which screen aspect you are using. The options are Full,
Aspect, 1:1 and 21:9 .
11. Lighting: Ambient light, choose to follow a favorite to many functions.
• Lighting Switch: Lighting main switch, default is "Enable".
• Lighting Style: 9 kinds of style choice.
Static Fixed lights are not ashing (Default).
Shifting Lights up from the left to the right and disappears to the right.
Filling Light up the Lighting in sequence (one-way back and forth).
Breathing Lighting breathing effect.
Motion Point Lighting is fully lit and moves back and forth in sequence.
Zoom Lights from the middle to the sides and then disappears in the middle.
Spectrum Transform spectral effects of different colors.
Wave
Change the color ow effect from left to right.
Star Starlight ashing effect.
-------------------------------------------------------------------------------------------------------
Note:
The (Spectrum or Wave) is not support Lighting Color.
• Lighting Color: Manually select the lighting color.
Red Red light, in the Lighting Style can support all style.
Green Green light, in the Lighting Style can support all style.
Blue Blue light, in the Lighting Style can support all style (Default).
Yellow Yellow light, in the Lighting Style can support all style.
Magenta Magenta light, in the Lighting Style can support all style.
Cyan Cyan light, in the Lighting Style can support all style.
-------------------------------------------------------------------------------------------------------
Note:
Lighting Style is (Spectrum or Wave) the Lighting Color is gray out and unavailable.
• Lighting Brightness: To control the lighting brightness 1~10 mapping 0x00~0xFF. (1~10,
Default is 5)
• Control Zone: There are 5 sets of independently control lighting switches, Default is “All”.