EN-18
Adjusting the System
1. Press the MENU key to open the OSD.
2. Using the Navi/OK button, select System from the OSD. Then navigate to
the setting you wish to adjust.
3. Use the Navi/OK button to select the setting.
4. Input: Select the source from an available input source.
5. Ambient light: Adjust the lighting effects, color, and style.
6. Auto Source: Automatically searches for available input sources.
7. DP Format: You can select which DP format you are using. The default is
set at DP1.4.
8. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
9. Wide Mode: You can select which screen aspect you are using. The
options are Full, Aspect and 1:1.
To Next Page
Loading...
