Acer V173 - Page 58

57
Assembly and Disassembly continue)
S4
A
ssemble front bezel
1.Reverse the panel by 180 degree,put
the surface of panel upsides and insert
front bezel in the panel.
2.Reverse the panel by 180 degree using
both hands,put the surface of panel
downsides and make sure FFC interface
is closer to operator.
3.Paste tinfoil on the position which refers
to attached picture,in order to cover the
gap in the panel completely.
Remark:Make sure the fixed job is
finished properly and lamp wire is closer
to right hand;Make the tinfoil smooth in
the corner of panel.
7
14030015900
R
ASSY, BEZEL,V,GRAY
SILVER,LE17J0
S5
Fix mainboard
(1).Insert FFC wire into its relevant
interface of mainboard properly like
attached picture1.
(2).Insert the short keypad into its
relevant interface like picture1.
(2).Put the fixed mainboard in the right
position.
7
91421300610
R
PCBA,I/F
BOARD(VC,EMEA),LE17
J0-622 ROHS
S6
Fix chassis
&poweboard
Place the chassis on the cushion after
check,like the attached Picture1.
7
01000007400
R
ASSY,CHASSIS,B,W/
DVI , LE17K0(VC)