Acer XB273U KF

English
24
Picture
X
X
Mode - User
70
Standard
Off
50
Brightness
Contrast
Low Blue Light
ACM
Off
LightSense
Off
HDR
Off
Super Sharpness
Picture
Enter
Move
5
Black Boost
Color
OSD
System
Audio
Gaming
Mode - User
Picture
Color
Max Brightness
Enter
Move
OSD
System
Save Sengs to...
Audio
Gaming
Off
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to to the function you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales or choose function.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM, HDR, LightSense.Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
Sets the degree of di󰀨erence between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8. Low Blue Light: The display uses the low blue light panel. It complies with TÜV
Rheinland Low Blue Light Hardware Solution certication under factory reset/default
setting (Low Blue Light=Standard, Brightness: 70%, Contrast: 50%, CCT: 6500K).
9. ACM: Turn ACM on or o󰀨.
-----------------------------------------------------------------------------------------------------------
Note:
Set to "On", will be based on the current screen to dynamic contrast adjustment.