Acer XB283K V3

English
Picture
Move
Back
Enter
Game Assistant 70Brightness
1366x768
Resolution
60
Hz
Picture
HDMI 1
Input
Off
FreeSync
Color
0SD
Gaming Contrast
Black Boost
ACM
HDR
ICE
Super Sharpness
Low Blue Light
Audio
System
User
Mode
Move
Back
Enter
Game Assistant
Max Brightness
1366x768
Resolution
60
Hz
Picture
HDMI 1
Input
Off
FreeSync
Color
0SD
Gaming
Audio
System
User
Mode
1. Press the Menu Key to open the OSD.
2. Toggle the joystick to the up or down to select Picture Page from the OSD. Then toggle
to the right to the function you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to choose function.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, ACM,
HDR, ICE, Super Sharpness, Low Blue Light, Max Brightness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note:
Sets the degree of di󰀨erence between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
-----------------------------------------------------------------------------------------------------------
Note:
If the image is very bright or has few shadow areas, adjiusting this setting
may not result in any noticeable changes to the image.
8. ACM: Turn ACM on or o󰀨.
-----------------------------------------------------------------------------------------------------------
Note:
Set to "On", will be based on the current screen to dynamic contrast adjustment.
9. HDR: can control o󰀨, HDR-400 and auto, the default is o󰀨, set to auto will automatically
detect and deal with HDR signal.