EN-15
8. ACM: Turn ACM on or off. The default is off.
9. HDR: Turn HDR Off, Auto or HDR-600. The default is Off. Select Auto
enables this function to automatically detect and process HDR signal.
10. Super Sharpness technology can simulate high-resolution images by
boosting the pixel density of the original source. It can make images
sharper and clear.
11. Max Brightness: Turn this function On to increase maximum brightness,
and then the Brightness function can be adjusted from 0 to 100 as
required. The default is Off.
Note:
1. If HDR is “Auto”, then Modes is set to “HDR” automatically.
2. If HDR is “Auto”, certain parameters (ACM, Gamma, Contrast,
Blue Light, Color Temperature, Black Boost, Grayscale Mode, 6-
axis Hue, 6-axis Saturate, and VRB) are grayed out and disabled.
Note: With HDR enabled, full-array local dimming display may
experience a blooming or haloing effect due to brighter zones
affecting images of adjacent dark zones.
To Next Page
Loading...
