Acer XV270 - Page 11

ACER XV270
11
S3
Assemble ASSY TRIM
Insert the LED wire into the LED BD and assemble the LED BD into the TRIM as picture 1.
Assemble the ASSY TRIM on the MF.
Lock 2 screws to the ASSY TRIM as the picture 3.
PICTURE 1 PICTURE 2
S4
Assemble SHD
Insert 2 FFC LVDS into the Panel, stick 1 tape on the FFC LVDS as picture 1.
Locate the SHD on the Panel and insert the big connector of the lamp wire to P/BD, then
paste 1 mylar on SHD as picture 2.
Tear off the 4 gums on the LED wire, arrange the LED wire and insert the LED wire into the
I/F BD as picture 3.
PICTURE 1 PICTURE 2 PICTURE 3
S5
Assemble SPK
Assemble the SPK to the MF.
Insert the wire of SPK into the I/F BD.
Arrange the wire of SPK and stick 3 pieces of black tapes to fasten the wire of SPK on the
Panel.
LED BD