10 11
9
8
10
11
12
ACCESSORIES:
1. On/off switch
2. Mouthpiece
3. Clean water tank
4. Dirty water tank
5. Main handle
6. Cord
7. Hose
8. Handle
9. Coupling point
10. Self-cleaning attachment
11. Mouth piece
12. Brush piece
STEP 1
Remove the spot cleaner from the package. The blue
coupling point on the front can be rotated. Slide the
blue lock down and press it to prevent leakage when
attaching the hose.
STEP 3
Remove the cap from the fresh water tank, ll to the
rst rim and seal tightly. (small tank)
STEP 5
Plug in, press on/off button and clean the stain with
the brush head. Move rmly over the stain to remove
dirt. Press the blue button on the brush piece for spray
function.
STEP 7
To self-clean the spot cleaner: remove the brush and
mouthpiece from the mouthpiece and attach the self-
cleaning attachment to the spot cleaner.
STEP 2
At the other end of the hose is a coupling point for the brush
headpiece.
STEP 4
Moisten the surface, spray Achaté stain cleaner on it or add a
dash to the clean water tank.
STEP 6
Empty the holding tank by loosening the top cover, pour out
the dirty water, clean the tank if necessary and replace it.
STEP 8
Press the on/off button on the spot cleaner to start and the
blue button on the attachment to start the cleaning process.
To Next Page
