ACME SP102 - Cleaning; Product Operations; Charging the Speaker; Using the Speaker

5
GB
Cleaning
Unplug the power cable before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth
for cleaning.
Operations
Charging:
• ConnectUSBcableintoSP102miniUSBport.
• ConnecttheUSBplugintoanycomputerUSBPort,itisnowcharging.
Red LED colour = SP102 is charging
Green LED colour = SP102 is fully charged
Using :
• Makesurethatthe“Volume”knobissettotheminimumlevel.
• Pulloutthe3.5mmaudiojackfromthebottom,connectittoanymusicdevice(3.5mmjack
ports).
• Turnthespeakeronbyturningthemiddleringwheelclockwiseandturnitcounterclockwiseto
turn it o.
• Adjustthedesiredsoundvolumebyrotatingthemiddlering.
• NowyoucanenjoymusicwithoutaUSBpowersupplycable.Thespeakercanalsobeusedwith
a USB cable connected.
• Rotatetheaudiocablebackbypullingunitsuntiltheend,itwillautorotateback.