2
6. MAINTENANCE………………………………………………………………………...17
6-1. Cleaning………………………………………………………………………………..17
6-2. Fuse Replacement………………………………………………………..…………..17
6-3. Tube Replacement…………………………………...…………………..................17
6-4. The ACOM1500 Simplified Schematic Diagram…………………………………..17
6-5. Troubleshooting………………………………………………………………………18
7. SPECIFICATIONS……………………………………………………………………..20
7-1. Parameters……………………………………………………………………………20
7-2. Functions……………………………………………………………………………...20
7-3. Storage and Shipment……………………………………………………………….21
NOTE
This unit has been set for 240VAC at the factory. Means are provided, however, to
reconnect it for 200/240VAC, as well as for 100/120VAC, in 10-Volt steps.
Please contact your dealer or look at the enclosed schematic diagram whenever a change
is needed.
To Next Page
Loading...
