Installing the EZ RC™ Remote Control Wizard 13
nsta ng
In the rst setup screen after you’ve connected your remote, check the Upload
and edit a setup from your remote option.
Then conrm that you want to proceed. This tells the EZ-RC™ Remote Control
Setup Wizard that you want to save the settings you created during the on-
remote setup.
If you’re uploading new device information (like the new devices you set up
in the on-remote setup), the nal screen before the EZ-RC™ Remote Control
Setup Wizard Main Menu asks for the model numbers of these devices.
For the best experience with your Xsight™ Color remote, we recommend
you add this information. This will allow the setup wizard to give you the full
functionality for your exact models.
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
Important: Disconnect the remote from your PC when you’re nished!
Leaving the Xsight™ Color connected to your PC will drain the remote’s battery.
To Next Page
Loading...
