2.2.1 XB board Peripheral List
2.2.2 Connections between MCU & X board
2.3 Usable Interface of XB board
3. Upgrade Firmware
3.1 Prerequisite for ST-LINK/V2
3.1.1 Hardware Preparation
3.1.2 Software Preparation
3.2 Connection & Disconnection via ST-Link/V2
3.2.1 Connect ST-Link
3.2.1 Disconnect ST-Link
3.3 Download Firmware via ST-LINK/V2
3.4 Prerequisite for ULINK2
3.5 Connection & Disconnection via ULINK2
3.5.1 Setup debugger as ULINK2
4. Developer Environment
4.1 Installation
4.2 Set-up (Only for ST-LINK/V2)
4.3 Edit Source and Build
5. SDK Features
5.1 Features
5.1.1 UART Debug Logger
5.1.2 Ping-Pong Demonstration
5.1.3 Power Saving
5.2 Flow Chart
5.2.1 Flow Chart of Main C Source Code
6. LoRaWAN
TM
deployment
6.1 What’s LoRaWAN(
6.2 LoRaWAN( Open Source
6.3 LoRaMac-node works with S76S/S78S SDK LoRa Driver
To Next Page
Loading...