EasyManuals Logo
Home>Acson>Air Conditioner>AWM 10G

Acson AWM 10G User Manual

Acson AWM 10G
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
128
PRE START UP MAINTENANCE
(AFTER EXTENDED SHUTDOWN)
Inspect thoroughly and clean indoor and outdoor units.
Clean or replace air filters.
Clean condensate drain line.
Clean clogged indoor and outdoor coils.
Check fan imbalance before operation.
Tighten all wiring connections and panels.
Check for refrigerant leakage.
The design of the ALC outdoor series allows servicing to be carried out readily and easily. The removal of
the top/front and back panel make almost every part accessible.
Under normal circumstances, these outdoor units only require a check and cleaning of air intake coil surface once
quarterly. However, if a unit is installed in areas subjected to much oil mist and dust, the coils must be regularly cleaned
by qualified Air Conditioner Service Technicians to ensure sufficient heat exchange and proper operation. Otherwise, the
systems life span may be shortened.
CAUTION!
Do not charge OXYGEN, ACETYLENE OR OTHER FLAMMABLE and poisonous gases into the unit when performing
a leakage test or an airtight test. These gases could cause severe explosion and damage if exposed to high temperature
and pressure.
It is recommended that only nitrogen or refrigerant be charged when performing the leakage or airtight test.
Downloaded from AC-Manual.com Manuals

Other manuals for Acson AWM 10G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acson AWM 10G and is the answer not in the manual?

Acson AWM 10G Specifications

General IconGeneral
BrandAcson
ModelAWM 10G
CategoryAir Conditioner
LanguageEnglish

Related product manuals