- WATERFLASH 2003 -
2.
www.actana.fr
Technical characteristics
- Vitreous china
- ASPIROPULSOR
- Choice of 15 colors
- Reverse operation
- Plug of visit
- With seat. cover
- Evacuation, rinsing and restoration of the water level is entirely automatically activated by a simple
touch of the pneumatic control button : cycle time 20 seconds.
TYPE MONOBLOC
Dimensions 490x345x435
Motor Asynchrone
Power 450 Watts
Voltage 230 V.
Intensity 2.8 A
Electronical class Classe II
Weight 34 Kg
Evacuation pressure 1 bar
Inlet water pressure 3 bars maxi
Drainage 50 meters on the same level,
6 meters if pumping vertically in 25mm diameter
tubing.
Vertical evacuation in Ø internal 25 or 26 mm
intérieur
6m
Principle of functionning of WATERFLASH 2003
Synoptic
Automatic command
The WATERFLASH works by pneumatic command, it is enough to press on the small opening in the
middle of the button to start the following cycle:
- Inflow of water of rinsing for about 8 seconds.
- Start on of the aspiropulsor simultaneously with the drainage of the water for 3 seconds (or 6
seconds in the case of a vertical ascent).
The motor is completly water tight.
Rinsing Aspiration and rinsing Add some water
Having lasted 8 s. Having lasted 3 s. oru 6
To Next Page
Loading...