Need help?Do you have a question about the Acteon Satelec Piezotome 2 and is the answer not in the manual?
General| Type | Piezoelectric Surgical Device |
|---|---|
| Frequency | 50/60 Hz |
| Ultrasonic Frequency | 28-36 kHz |
| Control | Touchscreen interface |
| Applications | Bone surgery, Implantology, Periodontology |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Handpiece | Autoclavable |
| Irrigation | Integrated Peristaltic Pump |
| Modes | Continuous, Pulsed |
Details requirements for connecting the device to the power supply and grounding.
Highlights restrictions by US Federal Law and tip compatibility issues.
Emphasizes proper grounding and certified installation for electrical safety.
Provides instructions on safe operation, including power management and handling.
Outlines cleaning, disinfection, and sterilization procedures for the device and accessories.
Stresses using SATELEC-approved accessories and warns against unauthorized repairs.
Details operation, output characteristics, and adjustments for the PIEZOTOME function.
Details operation, output characteristics, and adjustments for the NEWTRON function.
Provides step-by-step instructions for placing and connecting the control unit and accessories.
Covers settings customization, program selection, and power level adjustment.
Details settings customization, program selection, and power level adjustment for NEWTRON.
Steps for preparing the PIEZOTOME function, including connecting handpiece and priming.
Steps for preparing the NEWTRON function, including checking cords and connecting handpiece.
Details the steps for replacing the device fuses, including safety precautions.
Lists possible causes and remedies for the device not operating with the screen off.
Lists possible causes and remedies for the device not operating with the screen on.
Lists possible causes and remedies for lack of spray or inadequate spray.
Covers power faults and weak tip vibration issues with causes and remedies.
Lists possible causes and remedies for the absence of ultrasonic function.
Details the electromagnetic environment for which PIEZOTOME 2 is intended, focusing on RF emissions.
Provides guidance on maintaining minimum distances between emitters and PIEZOTOME 2.
To Next Page